- Product information
Ease of use
- Comfortable ironing with the flex out of the way.
- The flex guide is easily folded down by ‘lifting’ the ‘antenna’ out of the holder.
- Note: the flex guide is suitable for all Brabantia ironing boards with the exception of the Steam Control ironing board.
Flex Guide - Dark Grey is rated out of 5 by 9.Rated 1 out of 5 by Davidw12 from Useless for steam generator Using this in conjunction with a Philips Perfect Care Elite steam generator - the steam cord holder grip does not hold the cord securely and it keeps popping out. I have made the slot larger to acommodate the thick cord deeper into the slot but it still detaches, making ironing very frustrating. If the cord rubs along the side of the board it frays the cover and also wears away the braiding on the cord. This is not the answer - please design a holder that grips a cord of this size and stiffness, or recommend one of another make that does.Date published: 2018-06-14Rated 5 out of 5 by cannylad from Long Awaited Facility My ironing board is very old - the flex guide ditto -held on by spring clip . The new attachment which remains on the board is stronger, more flexible and easier to use. An excellent product,well made and delivered promptly tooDate published: 2015-06-25Rated 2 out of 5 by AlanB from Nothing special Sort of does the job ok, but is always in the way - either while vertical or in the storage position. Should fit under the edge of the board. But does help keep the flex out of the way while in use. Just gets in the way of the iron a bit during use and is a nuisance while the board is stored. Also because the fixing clamp is plastic it is difficult to keep it tight - I'm frightened it's going to break if I do it up any more as it's bowing out as it is.Date published: 2017-09-21Rated 2 out of 5 by grandma A from Not impressed I bought a new brabantia ironing board and could not get my old flex holder to fit the new board , so ordered this one. It was easy to attach to the board but the flex on my iron was too thick to slot into the holder and the guide itself is so high I had to move furniture out of the way for the flex to reach the plug. In the end I bought a longer flex for my iron - cost nearly another £7.00 - and even though it is thinner than the original it still does not slot cleanly into the flex holder. Also, because you have to take the flex out of the holder to store the ironing board away it is fiddly to find the correct length every time and I fear that over time, having to take the flex in and out will cause the flex to become threadbare and need replacing. If I can find an alternative I will not hesitate to buy one.Date published: 2017-06-01Rated 2 out of 5 by CS13 from Does not hold the Cord I bought this to hold the Cord of my Steam Generator Iron but it does not hold the cord for more than a few minutes as the clip is not wide enough to hold the cord properly even though the picture on the advert shows the same type of Iron I haveDate published: 2016-11-08